Dying Light 2: Houndfield Electrical Station Glitch Solution. Allow power to be provided in the Houndfield area!
One of the utilities that people lost when the Harran Virus broke out was electricity. Restoring power to electrical stations in Dying Light 2 can assist restore electricity and establish a safe zone. This guide will walk you through the process of finishing the Houndfield Electrical Station.
Dying Light 2 – Houndfield Electrical Station
The Houndfield Electrical Station is a facility in the Houndfield region’s southern section. To begin the Houndfield Electrical Station quest, you must first enter the station. You must connect the cables inside the Electrical Substation to complete your mission.
Turn left as you enter the gate and take the lift. Jump down to the lower roof from the upper roof, as illustrated in the photo above. Here is a broken window panel that will allow you to enter the building.
Turn right when you enter the building and loop around until you reach the back part of the metal crate in the centre. Jump towards the metal crate and grab the yellow ledges at your back with your momentum.
Climb to the top and then cross to the other side using the rope. Turn right and continue down this corridor until you see a green socket 2 in the chamber. Pull the wire to the ground floor and leap all the way down.
Put the other end of the cable into a red socket 2 that you should see behind you.
Now, on your right side, enter the middle opening and ascend the ladders. On the following level, you should see another set of ladders, so climb these as well.
You should see green socket 1 in this chamber, so pull the cable here and unlock the gate. To go to red socket 1 across the room, use the rope in the middle of the room. Return to the ground floor and enter the elevator room to the right of red socket 2 from the previous level.
To complete the objective, restore electricity to the Electrical Station.
